The best laid plans of mice and Slor…

February 3, 2008

You know how some things tend to snowball?  Well, let’s just say my last week has been rapidly rolling downhill, getting larger and larger as it’s moved on.  If you recall, I stated in my last entry that I would be posting photos of the machines I’ve been working on the next day.  That was just over a week ago.  Here’s a summary of events that have taken place between then and now:

– I decide it’s time to take some photos to post here.
– In order to be able to take decent photos, I figure I’ll need to finishing cleaning up the computer room.
– Just after I’ve started cleaning again, I’m notified that someone in the area is looking to part with a VAX system cheap.  As is my tradition when I’m not sure if I should buy something, I offer the guy half of what he what he’s asking for the system.  He says “yes”, so that’s another half trunk full of stuff I need to find room for.  It’ll have to stay in the trunk until either my room or the garage has some space freed up.
– As I get back to the cleaning, I figure it would be stupid of me to get everything all packed up and put away again without taking out, photographing, and settin aside the multitude of “stuff” that I have been meaning to get rid of for a while now.  This, of course, means making the mess worse before it gets better.  The VAX stuff makes itself comfortable in my trunk while I tear up the computer room and garage some more.
– Each time I start to clean up again, I run across a piece of hardware that I can’t put away in good conscience without installing whatever upgrade has been sitting around for it. There are a couple late nights gone.
– After a good chunk of time upgrading, photographing, and setting aside items to sell (more on that later :)), I am finally able to make some progress putting things away.
– Today, I am finally able to walk through the room again, take some photos, and write this blog entry.

As you’ve probably already noticed, the RetroChallenge ended 3 days ago, so that pretty much means I made ZERO progress in finding something “interesting” to do with the machines I spent the previous days getting up and running.  Am I disappointed by that?  Yeah, a little, but my disappointment is greatly overshadowed by my happiness that those machines are now working, I have organized a bunch of stuff to get rid of, my work area is nearly a work area again, I eventually found a nice spot to put the VAX(guess what my next restoration project will be), and it’s only been a couple weeks.  I’ll credit the RetroChallenge for getting me on gear on a lot of that, and perhaps I’ll enter myself for the “Most Untimely Yet Productive U-Turn in a RetroChallenge” prize.  At the very least, I’ll be ready when the next one comes along!

For what it’s worth, here are some photos of the machines I worked with for this challenge.  In the next few days (no, really), I will do another post or two to detail all the machines currently in this room that is nearing museum level and shoot more pics of the everything in sight.  Anyway, thanks to the RetroChallenge for some motivation, and on to the photos:

P2030045 The Amiga 3000 and DEC 3000

P2030046 The HP 9000

P2030047 The TT030 with Spectre

P2030048 The next project…


Amiga 3000 – I win, at least for now

January 26, 2008

I received the Amiga OS 3.1 install floppies I had been waiting for yesterday, and needless to say I was itching to give them a shot.  The I stuck the first disk in, turned the machine on, and finally saw its first sign of bootable life since its original system disk was destroyed.  Straight to the disk utilities I went to get the hard drive set up, but wait – no hard drive was found by the Amiga.  Uh-oh.  Knowing that I sometimes have SCSI hardware just plain configured wrong, I took a shot at changing the jumper settings just a bit.  After a little bit of work, finally the Amiga could see my hard drive.  Unfortunately during the process, though, I found that the machine had trouble reading some areas of both the Install and Workbench disks, which of course did NOT bode well for getting the OS put on the hard drive.  With a little cleaning, the Install disk seemed to get past its issues, but there were 4 blocks still on the Workbench disk that could not be read.  As I expected, this prevented the Workbench from being installed on the hard drive.

After wallowing for a bit, I thought perhaps I should give the emulation idea one more go.  Since I had changed the drive configuration and managed to get it formatted in the actual Amiga, perhaps WinUAE would have more success using the disk.  Lo and behold, and few minutes later, I could see the drive in my emulated Amiga.  All I needed now was a good set of disk images to use for the install, so I went back to my disk supplier (who I now REALLY owe) and asked if I could possibly get him to email me a set of disk images to give this a shot.  By the time I got a reply with the images that might do it for me, I was already falling asleep in my chair and way too tired to give it a go.  That turned out for the best, because later this morning I received a followup email stating something like “Ignore that last email – THESE are the images you want.”  It was tough to actually go to work today knowing I was so close to getting this machine working, but willpower won out.

When I got home tonight, the moment of truth was near.  I fired up my emulation host, got WinUAE configured as closely to the configuration of my physical Amiga 3000 as possible, and booted with the 3.1 install image.  The install did its thing (and did it fast at 8x floppy I/O), and I soon had a hard drive ready to run.  There was nothing left to do but move the drive back to the Amiga, turn it on, and cross my fingers.  Could this actually be my victory?  Well, if the thing hadn’t booted up from the hard drive, you can bet you bottom dollar I would still be working on it instead of writing this blog entry!

Part I: Revive all the non-functional machines lying around in the retro graveyard – CHECK.

Tomorrow will be photo day – I’ll get some shots of all the machines involved in this project and possibly some others relating to my retro collection.  I now have 5 days to get them all doing something “useful”.  Will that require putting the Amiga 3000’s hard drive back on my PC in order to get the appropriate networking utilities installed?  I certainly hope not, but that has yet to be determined…

Amiga 3000 – patience is not my favorite virtue

January 21, 2008

The Amiga is my last machine to get up and running, and it’s definitely testing my patience.  Unlike most computers I own, there are not too many ways to get a completely raw Amiga up and running without having actual Amiga-formatted floppy install media, and there is apparently no way to create an Amiga-formatted floppy on typical modern PC.  Of course, I was not aware of that tiny detail until after I had stolen the the machine’s hard drive a while back for use in another, more pressing project.  The only idea I have seen that circumvents this process is to put your hard drive in a PC, use the WinUAE emulator to boot and load an OS onto the drive, and then move the drive back to the Amiga.  I gave that a number of tries, but I have thus far been unsuccessful in getting the emulated Amiga to find the SCSI device and allow me to load the software.

The better news is that I recently had someone contact me (yes, in response to a newsgroup post) and offer to send the necessary boot media for only the cost of shipping.  I jumped at that, and I’m now playing the waiting game to see how long it takes to get here.  Being the big spender I am, I have offered to pay for priority shipping, so I hope to see the disks soon.  Until then, I’m using my time to further improve the machines I’ve already rebuilt and clean up the computer room (no small task).

I have some ideas for making all these computers “useful” as a group, but I have not yet settled on a formal goal.  With 10 days left in the month, though, I should have PLENTY of time. 🙂

Spectre GCR – no freakin’ way

January 18, 2008

I couple nights ago, I swapped the spare 500 MB drive into my Mac IIci (which happens to be a Low End Mac best buy) and booted it up with my Mac OS 6.0.8 install floppy.  The IIci is the most comparable machine to a Mac Plus that I own, and one thing about the OS is that you can install it for “all Macintosh systems” to include support for every system OS 6.0.8 is aware of, so off I went for quickest OS installation I’ve done in a while – I believe it took about 5 minutes.

The next thing I had to do was gather up the necessary parts to hook the drive up to my TT’s ACSI port.  That included an external enclosure I grabbed from work, my ICD AdSCSI ST host adapter, mounting bracket, and a few cables.  Once I got all that put together, I turned on the TT and configured HDDriver to scan the ACSI bus, and I was pleased to see it recognize the drive on reboot (along with the CD-ROM drive I added to the enclosure for future tinkering).  It seems perhaps I’m finally learning how to configure a SCSI chain properly on the first try. 🙂

Now for the moment of truth.  The only thing left to do was start up the software to kick off Spectre and try to use the drive.  Not surprisingly (since RTFM is always my last resort), it took me a few tries to get the configuration settings right, but once I finally did…  Well, that’s where the “no freakin’ way” comes in.  The Mac BIOS was able to find and boot from the transplanted hard drive, and right in front of me sat my new Macintari TT Plus!  My floor is just a bit cleaner now, so I DID do the Dance of Joy for this one.  The hardware emulation runs quite smoothly, and I’m eager to get back to it tonight to test out some apps on it.  The Spectre, even though it plugs into the TT’s cartridge port, does absolutely nothing but stay out of the way unless you tell it to take over.  This means I can just leave it plugged in all the time – even when I’m just doing ordinary Atari stuff on it.

Only one machine remaining to get functional, and then I can start making them useful!

HP 9000 – it’s alive!

January 17, 2008

Wow – this one was smooth sailing after finally getting the right CR-ROM drive hooked up.  The HP-UX install process took about as long on this machine as did the DEC 9000 OpenVMS install.  A notable difference between the two is that there were no errors incurred by the HP-UX install.  Even though I tried to cause myself some grief by incorrectly configuring the network settings, HP-UX recognized my potential for mistakes and put something on the screen to tell me how to redo the network settings later on without having to scour the web for instructions.  Like a long lost friend who knows my potential for losing information, it even left me an email on the machine to reiterate the process for making configuration changes – that’s a big gold star for user-friendliness.

Bottom line is that I now have this machine up and running with the OS it was intended to run, and I have one more item checked off of my “building the eclectic office” goals list.  Only thing left to do right now is to pretty it up just a bit with some of my open source favorites like bash, openssh, and gcc.  Then, on to the next machine…

HP 9000 – finally some progress

January 17, 2008

It’s been a while since I messed with the 9000.  In fact, I actually stole its 1 GB drive a while back for use in my TT.  Yesterday at the office, I stumbled upon a 4 GB drive in the junkpile that (assuming it was still functional) would be perfect for this box.  I actually rebuilt the machine once after I brought it home, but I had so much trouble trying to figure out a way to install HP-UX on it that I gave up and did a network Debian install.  That worked well and ran fine, but it was very much against the spirit of my goal to regain another OS that I used to work with.  So, tonight I was determined to finally get HP-UX onto the box.  That meant getting around the fact that the machine has no CD-ROM drive, you cannot install HP-UX from a floppy drive, and you cannot netboot an HP-UX install from anything but another HP-UX machine.  This would be fun…

Software-wise, I was already in good shape thanks to an HP-UX 10.20 original CD set that I acquired from someone who replied to my call for help in comp.sys.hp.hpux (who says Usenet is dead?) with a very reasonable price of $20 shipped.  They’ve been tucked away just waiting for another shot, and tonight was the night the would get it.  Tonight was the night I managed to get the right CD-ROM drive temporarily added to the internal SCSI chain, typed “boot scsi.1”, and nearly did the Dance of Joy when I started seeing boot messages from the install CD!  In case you’re wondering, I only DIDN’T do the dance because there is currently not that much open floor space in my computer room.

Once the install kicked off, I answered just a few questions and sent it on its way.  As I write this post, I see the installation process I began before starting on the post is currently on package 38 of 243.  It’s going to be another waiting game.

DEC 3000 – later that evening

January 16, 2008

After listening to the OpenVMS install churn away for somewhere between 2 and 3 hours, it finally stopped.  As I eagerly approached the machine in hopes of seeing something like “install complete – press any key to boot from dka0:”, the image of utter failure formed in front of my eyes in the shape of a single add-on package that failed to install.  It happened to be the TCP/IP package, so I would have thought it could have finished everything else so that I could do TCP/IP later on myself (since it’s not a required package).  Sadly, that was not the case.  That single failure was enough for the install to give up completely and leave me with a completely useless system.  There’s one strike against OpenVMS.

Not really wanting to sleep anway, I decided try the install one more time and hope for the best.  This time, I did NOT select the TCP/IP package to be installed, and I sent it off churning again for a couple more hours.  What would it choke on this time?  Believe it or not, nothing!  Install finished, I booted into my shiny new OpenVMS 8.3 OS.  I installed the hobbyist licenses, and I eventually figured out how to install TCP/IP manually, which installed just fine on the first try.  Go figure.

A little history: One of my current goals in the retrocomputing scene to to reacquire as many of various types of hardware and/or OS platforms as I’ve used regularly over the years.  VMS happens to be one of them that dates back to my college years.  We had a VAXCluster running VMS that was the university’s primary general purpose system.  People read their email, chatted, play games, did homework, etc. on all the VT nodes set up across campus.  Since acquisition of a VAX mainframe really isn’t practical, the DEC 3000 will have to do. 🙂

Besides getting the 3000 generally set up and networked, I have been playing with a number of random utilities, building a few from scratch, using it to browse the web and hit IRC channels on occasion, etc.  Also, since the existing hard drive is only 1 GB, I also just added a second 2 GB drive to use for extraneous utility programs and user data.  Things seem to be running smoothly.

More later, after the other machines catch up!